Settings Of A Jl Audio Amplifier

Audio systems have become a part of householdthe amplifier. The filter used for the above purpose is
devices. Hence has resulted in the emergence ofcalled the crossover filter.
companies which produce such systems. JL audio isHigh frequencies are called treble and the low
one of the manufacturers of quality electronic audiofrequencies are called bass. The high frequency treble
products. Their products include audio systems foris eliminated using low pass crossover filter. Similarly
home, mobile and marine. They are well known forthe low frequency bass is eliminated using high pass
their subwoofers, subwoofer amplifiers and audiocrossover filter.
crossovers. This article reads on how to adjust a JLIt is observed that small speakers are being powered
audio amplifier.by amplifiers, as in the case of car dash. In the
Amplifiers need to be set properly for the properabove case, a high pass crossover filter is set. After
output. The following paragraphs will give you thethat, the frequency is set to 100 Hz. It is also seen
clear picture of fixing the amplifier and adjusting it tothat subwoofers are powered by amplifiers. In this
obtain the best music.case, a low frequency crossover filter is set. Similarly
A high frequency or a low frequency may causeas that of the other one, the frequency is set to 100
damage to the amplifier. Thus it is understood thatHz.
these frequencies has to be avoided from reaching